Junction Box / Housing for PTZ Surveillance Camera

### 💡 The Problem: Where to put the power supply of the new outdoor camera?

Many powerful PTZ surveillance cameras come with a power supply and unsightly cables, which make for a difficult and clean installation. The result is often a messy setup.

This housing is the simple and effective solution to store the power supply and excess cables directly under the camera, creating a clean, professional mounting base. This is the straight version – a 45° version is also in progress.

---

### ⚠️ Important Note: Not Waterproof!

This housing serves as a mounting aid and visual shield to organize the power supply and cables. It is **not** designed to be waterproof and offers **no protection** from direct rain or moisture. Operate the power supply only in a **weather-protected location** (e.g., under an eaves or in a sheltered area).

---

### The Solution in Detail:

* ✅ **Clean & Tidy Installation:** With internal dimensions of approx. 118x62x30mm, the housing offers enough space for most standard power supplies. Everything is neatly stored and out of sight.
* ✅ **Suitable for Common PTZ Cameras:** The mounting holes (43.5mm spacing) are designed for widely used models from platforms like AliExpress, Amazon or Temu.
   * **Tested with this camera model:** **https://s.click.aliexpress.com/e/_c4DPATEL**
       *(Note: If you purchase through this affiliate link, I receive a small commission at no extra cost to you.)*
* ✅ **Easy Assembly for Everyone:** This design requires no special tools or threaded inserts. The two M6 nuts for camera mounting are simply fixed in the designated recesses with a drop of superglue.
* ✅ **Thoughtful Design:**
   * **Flexible Wall Mounting:** The back offers slotted holes (11x4.5mm) and various small drill holes for flexible attachment to any surface.
   * **Clean Cable Management:** A side 10mm opening and two large holes on the back allow for clean cable entry.

---

### ⭐ Optimized 3MF Project File

You receive a .3mf project file that can be loaded directly into Bambu Studio (and other compatible slicers). The model is already optimally aligned on the print bed.

---

### 🔧 Recommended Print Settings

* **Material:** **PETG** or **ASA** are strongly recommended for outdoor use due to their UV and temperature resistance.
* **Hardware:** 2x M6x10 screws and 2x M6 nuts.
* **Walls:** 3
* **Infill:** 20-25%
* **Infill Pattern:** Gyroid
* **Supports:** Not required.

If this design has helped you, I would appreciate a like or a boost. Have fun securing your home!

⚡ Bambu Lab Verified

Every design is perfected by me on the Bambu Lab X1C or A1. I optimize every model down to the last detail for FDM printing, extracting everything technically possible. Load, print, fits.

💎 Material Recommendation

I use Sunlu PETG/PLA – reliable and AMS-ready. 👉 Filament:   Here I order my filament (Affiliate Link) 

🛠️ Your idea as a 3D model?

Need an adjustment or a custom CAD design? Write to me directly!

💼 Commercial License & Exclusive

Selling physically? Get the Merchant License in my profile! B2B: I offer exclusive, unpublished models

 Contact me if interested.

❤️ Support

Like 👍 or Boost 🚀 help me immensely! ☕ Coffee: Buy me a coffee