Search models, users, collections, and posts
Queen
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
2.5 h
1 plate
Open in Bambu Studio
Boost
6
9
0
0
3
1
Released
Description
Content has been automatically translated.
Print with 100% infill (default infill is also fine), layer height 0.08mm, initial layer height 0.16mm (default 0.20mm is also acceptable)
Model size is 120x180mm
Higher layer heights can be used below a minimum depth of 0.48mm for printing
Maximum depth is 2.2mm, actual depth is 2.2mm
Filaments used:
- PETG JAYO Black Translucency Distance: 0.3
- PETG Bambu Lab Basic Red Translucency Distance: 2.5
- PETG Bambu Lab Basic Yellow Translucency Distance: 6
- PETG Bambu Lab Basic White Translucency Distance: 3.5
This printing uses 4 different filaments
Switching instructions:
- Start with black
- Switch to red at layer 11 (0.96mm height)
- Switch to yellow at layer 16 (1.36mm height)
- Switch to white at layer 19 (1.6mm height) until printing is finished
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)