Vacuum Bag Valve Spacer
Copyright Claim
Vacuum Bag Valve Spacer
Boost
70
144
48
Print Profile(2)
0.16mm layer, 2 walls, 15% infill
10 min
1 plate
0.2mm layer, 2 walls, 15% infill
9 min
1 plate
Open in Bambu Studio
Boost
70
144
48
6
222
220
Released
Description
A small but very useful helper for vacuum bags. This allows the air to be extracted much easier and faster.
You can simply stick the part with some double-sided tape from the inside to the valve. Of course it works without tape but then it's a bit fiddly.
The print takes just about 6 minutes.
Please leave a like if you enjoy my design. Also feel free to check out my other uploads. :)
Comment & Rating (48)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed very well! Thanks
(Edited)
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
wunderbarer Druck und es funktioniert
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
Simple, but very helpful.
I printed a lot of them :)
Thanks for sharing the design.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Great idea! makes it easier to vacuum seal bags!
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
I used some double sided tape as described by the designer and this worked great. Definitely vacuums the air out quicker.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Works great!
(Edited)
1
Reply
This Spacer really improves the time I spend on vacuuming the bag.
Simple, but works great 👍
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Fantástico!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
etwas zu klein für eine elektrische Vacuum Pumpe. aber wenn man es größer skaliert, top.
danke fürs teilen
0
Reply
Buena idea :)
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld