Bambulab OEM Filament Spool holder
Remixed by
Copyright Claim
Bambulab OEM Filament Spool holder
Remixed by
Boost
61
121
37
Print Profile(1)
0.32mm layer, 3 walls, 15% infill
2.5 h
1 plate
Boost
61
121
37
0
221
153
Released
Description
great THX @Bounet i Remixed it and added 2 holes for nuts / it works without too
The original Bambu Lab spool holder is such a pretty piece of metal I couldn't bear to put it away in a drawer forever since it goes to the worst possible place on the machine…
So, I gave it some feet :)
You will need 2 M3x10 or 12.
Personally, I ran an M3 tap through the holes but if you drill them a tad bigger you might just screw it in.
I printed it with 3 walls for strengths in PLA.
No support needed, extra cooling is best.
- I Fix the Hols for a perfect fit and improved the print bed adhesion
Comment & Rating (37)
All
Print Profile
0.32mm layer, 3 walls, 15% infill
It came out very nicely with Overture Black PETC in my X1c.
0
Reply
Garbage model, and i put another wall and more infill to it, came out great but this model have weak feets, i force to see the strenght and i break it easily
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
You save my life 🤷😅
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
Strength Issue:Now is stronger ...
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
perfect
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
Thanks
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
no issues. made it an extra spool holder.
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
Very resourceful and easy print.
0
Reply
Print Profile
0.32mm layer, 3 walls, 15% infill
super helpful. The metal piece can be attached with the original screws, no need for a visit to the hardware store.
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRemixes (1)
Related Models
© 2024 MakerWorld