Columbus Blue Jackets Coaster Set
Columbus Blue Jackets Coaster Set
Print Profile(1)
Description
Made to be printed face down on a textured plate, giving it a nice top finish.
These are designed to be used with a 2mm thick, 100mm diameter cork coaster with adhesive backing. I used these ones:
https://www.amazon.ca/dp/B08XZ4VM36?psc=1&ref=ppx_yo2ov_dt_b_product_details
I print these as a set of 4 and have included a holder as well. For the bottom of the holder I use these rubber stops:
https://www.amazon.ca/dp/B093DHDM8F?psc=1&ref=ppx_yo2ov_dt_b_product_details
Both the cork and the rubber stops give the coasters a nice feel, and help to prevent any sliding around.
Main print settings:
Layer height: 0.16
Infill: 25%
Infill Pattern: 25% (this is to ensure a smooth backing)
Infill/wall overlap: 60%
***If using the above cork backings, please ensure to scale X & Y to 100mm ONLY. Do not scale Z***
PLEASE NOTE: THIS PROFILE IS FOR A 0.4mm NOZZLE AND THE STARS ARE NOT THE BEST, I HIGHLY RECOMMEND USING A 0.2mm NOZZLE WHEN PRINTING THIS FOR BEST APPEARANCE
Comment & Rating (8)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
