Hello!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA+ IIID Max Night Gray Transmission Distance: 0.8
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #9 (0.84mm) swap to Night Gray
At layer #10 (0.92mm) swap to Red
At layer #17 (1.48mm) swap to Orange
At layer #21 (1.8mm) swap to Jade White for the rest.