Dodge Charger 392 - Hueforge by Canadian Gamer

Canadian Gamer

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

Adaptive layer height 0.08mm layer, 2 walls, 100% infill

Designer

6.2 h

1 plate

4.8(4)

Open in Bambu Studio

Boost

Released

Description

This model was built by special request as they own the car pictured.

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

Please post a picture of your printed copy! I'd love to see it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Dark Blue Transmission Distance: 5
PLA Sunlu Black Transmission Distance: 10
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA Overture White Transmission Distance: 3

Swap Instructions:
Start with Dark Blue
At layer #7 (0.64mm) swap to Black
At layer #12 (1.04mm) swap to Marine Blue
At layer #19 (1.6mm) swap to Silver
At layer #22 (1.84mm) swap to White for the rest.

Comment & Rating (7)

@user_3089725730

Print Profile

Adaptive layer height 0.08mm layer, 2 walls, 100% infill

sweet

The designer has replied

@CanadianGamer

love the blue you used! thanks for rating and sharing!

(Edited)

@little_airwolf

Print Profile

Adaptive layer height 0.08mm layer, 2 walls, 100% infill

Awesome

The designer has replied

@CanadianGamer

Love the blue you used! Thanks for rating and sharing!

@Hambyeverett

Print Profile

Adaptive layer height 0.08mm layer, 2 walls, 100% infill

came out great. but the swap directions on the download page does not match up to the file when you download it.

(Edited)

The designer has replied

@CanadianGamer

I've started putting the following description in my uploads but this is one of my earlier files and It doesn't explain what is going on as well: In my print profile I have used a height range modifier (HRM), which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. This means that the layer heights listed below in my printing instructions will not match my print profile (they will be off by 3) but the mm heights will still match!