Search models, users, collections, and posts
Print Profile(2)
Self-watering wall planter 0.2 mm layer, 4 wals, 15 % infill
Designer
10.6 h
2 plates
Brim, Supports, Reoriented mounting clip
13 h
2 plates
Open in Bambu Studio
Boost
168
476
17
20
369
136
Released
Description
Geometric wall-mounted self-watering planter (hanging) with quick water control and refilling. Designed to ensure perfect irrigation of the plant root system.
For printing, I recommend using the attached files in STEP format. No supports needed.
Printing recommendations:
- Use PETg, ABS or ASA, do not use PLA.
- set a minimum of 4 walls and 10 - 15% infill to ensure the water permeability of the pot
Enjoy! I will be glad if you share your colour combinations!
Assembly instructions
Note:
I used two 6x30 mm dowels and two 4x40 mm screws for fixing to the wall.
Documentation (1)
Assembly Guide (1)
wall_planter_info_4a170c3c-5d10-49c5-8986-5ba7c6773a64.pdf
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (17)