Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Light Blue Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6
PLA+ Sunlu Green Transmission Distance: 10
PLA+ Esun Bone White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Light Blue
At layer #15 (1.28mm) swap to Bone White
At layer #16 (1.36mm) swap to Green
At layer #18 (1.52mm) swap to Bone White for the rest.