Juggernaut
Print Profile(1)
Description
This is kid juggernaut from marvel. this is based off a page from the comic book. the artist is dike ruan.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 1.99997mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #15 (1.28mm) swap to Sunflower Yellow
At layer #18 (1.52mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want.
To scale it, change the x and y dimensions, do not change the z dimension.
Boost Me (for free)
boost me if you like my prints
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)