A nice little Hueforge version of Groot
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Gereric Black
PLA Gereric Green
PLA Gereric White
PLA Gereric Yellow
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to BambuLab Green
At layer #9 (0.8mm) swap to Jade White
At layer #11 (0.96mm) swap to Yellow for the rest.
All comments, suggestions and ideas are welcome.
GLHF