Michael Myers Hueforge - Free 3D Print Model

Search models, users, collections, and posts

the_bearded_jedi

Generative 3D Model>Hueforge & Lithophane

IP Report

Print Profile(1)

All

P1S

X1E

X1 Carbon

H2D Pro

P1P

H2S

H2D

P2S

H2C

X2D

A2L

0.08mm layer, 2 walls, 100% infill

Designer

5.2 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

Project: michael myers.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.52mm

Filaments Used:
    #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
    #db3e14 PLA PolyTerra Muted Red Transmission Distance: 1
    #f78e0e PLA PolyTerra Sunrise Orange Transmission Distance: 2.5
    #e5c8a2 PLA PolyLite Cream Transmission Distance: 2
    #e6dede PLA Overture Matte White Transmission Distance: 3.7
This print uses 6 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #10 (0.88mm) swap to Blue Gray
    At layer #12 (1.04mm) swap to Muted Red
    At layer #14 (1.2mm) swap to Sunrise Orange
    At layer #15 (1.28mm) swap to Cream
    At layer #16 (1.36mm) swap to White for the rest.