Calibration Test
Copyright Claim
Calibration Test
Boost
33
72
15
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
1.3 h
1 plate
Open in Bambu Studio
Boost
33
72
15
4
394
164
Released
Description
Calibration test all in one.
Comment & Rating (15)
All
The print profile is no longer public
it is a very good test for your printer
if you want to see your printers full potential, print this
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
todo genial excepto en la bola que supongo que habrá que ajustarlo mejor
0
Reply
worked pretty well on my A1
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Good stress test. The A1 Mini had trouble at the top half of the sphere.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Settings are bad and just the generic ones. They need tweaking to even be able to print all of the items on the plate like the squiggly line. Doesn’t really show the potential of the printer as the printer could do better with better settings.
0
Reply
... that's the point of the test
0
Reply
Replying to @user_1214777771
There's no point if it can't even do the complete test. The least you could of done was added the arachne wall generator so that it can actually do the test correctly.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect to calibrate and test every material
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
The print profile is no longer public
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld