The Smoothy Mount - For The Smoothy Y Splitter by JDJDJD

JDJDJD

3D Printer>3D Printer Accessories

Print Profile(16)

All

X1 Carbon

P1S

P1P

X1E

Smoothy V2 Mount 10x3mm Magnets

Designer

37 min

1 plate

4.9(607)

Smoothy V2 Mount 6x2mm Magnets

Designer

36 min

1 plate

4.9(182)

Smoothy V2 Mount 8x3mm Magnets

Designer

36 min

1 plate

4.9(175)

Smoothy V2 Mount 6x3mm Magnets

Designer

36 min

1 plate

4.9(205)

Click to see more

Boost

1969

3618

1679

10.7 k

6.9 k

Released

Description

The Smoothy Mount is the official mount designed for use with the Smoothy PTFE Bowden Y Connector. The Smoothy allows you to use an external spool with your Bambu Lab machine without disconnecting your PTFE Bowden Tubes.

The Smoothy can happily rest inline without a mount which has some advantages, but some users have requested a mounting method so I'm delivering for you!

The Smoothy Mount features a universal mounting design so it can be used with either an M3x8mm screw or magnets.

Having the mount separate allows for easy removal of the Smoothy without removing fasteners like screws, etc.

I've designed a couple images with placement ideas but the location and method is up to you.

The screw mount is most secure, while the magnets allow for more flexible placement. On the X1C, the screw hole closest to the outside edge of the machine works best.

Several magnet sizes are now supported for flexibility (see files). The magnets need to be fairly strong. If you don't have strong magnets, I recommend the screw mounting method.

The Smoothy Mount is compatible with Smoothy models that have flanges at both ends, which includes:

Smoothy V2 PC4-M6
Smoothy V2 PC4-M10
Smoothy V1 PC4-M10

If you have a Smoothy V1 M6 with no flange, simply upgrade to a Smoothy V2 and you'll be good to go!

FEATURING:

No Supports
No Brims
No Overhangs

NOTES:

I printed all tests successfully with the following:

Nozzle: 0.4mm
Layer Height: 0.2mm
Walls: 4+
Infill: Gyroid
Brims: Disabled
Supports: Disabled
Orientation: Vertical, wide side down
Glue Stick: Yes
Bambu Lab X1C
Cool Plate

UPDATES:

Support for several new magnet sizes has been added!

The Smoothy can be used commercially, but can't be resold.

Enjoy!

Download The Smoothy PTFE Bowden Y Connecter here: https://makerworld.com/en/models/18174

Comment & Rating (1679)

@ScrappyCoco

Great design and a perfect fit to the smooth Y split adaptor. Short question, if I'm planning to use it with the screw which screw do i remove from my Bambu lab X1C, the one that holds the side cover or the one that holds the back panel? Thank you

The designer has replied

@JDJDJD

That looks great! When facing the back, it's farthest screw on the upper right. You'll want to use an M3x8 (socket head cap is ideal). You can also extend your PTFE tube for a more gentle curve by repurposing the coupler that comes with the machine (see last image of Smoothy Mount page).

(Edited)

@ScrappyCoco

Replying to @JDJDJD :

Thank You

@ScrappyCoco

Replying to @JDJDJD :

I've seen your image, is it mandatory to use their connector also(the grey one with one blue end and one black end)?

@AloisMravec

Hello, one of the my first 3D print in my life. It works perfect for me, printed from black Bambu PLA-CF which was in the box with the printer. I used 0.4 nozzle, anyway it was necessary to increase the nozzle temperature from recommended 230° to 235° for this filament because the first attempt was wrong. About half of the splitter was printed when the filament stopped coming out from the nozzle, while the print continued without filament. So I stopped the print, increased the temperature, slowed down a little bit and then came out perfect. Thank you so much for sharing this model.

(Edited)

The designer has replied

@JDJDJD

Great job! I’m glad it turned out so nicely for you - that looks amazing. Thanks for your photos, enjoy!

@OneMakerShow

I have a good remix to use the extra Bambu Scraper Magnet instead of Round Magnets that you have to buy for sure, but you don't permit derivates and remixes. That's a really poor choice for a community Member.

@PietDeVries

I agree with you however if you want to share it you can still add it as a print profile. I see at least one other profile there that has custom magnet holes. Great idea to use that magnet though. I don't know how strong it is, I already had a pack of 6x3 neodymiums that are crazy strong so I'm using those.

@OneMakerShow

Replying to @PietDeVries :

I didn't know it could be done. Thanks for the information. I will do it immediately. It is still strong enough to keep the splitter in place.

@user_1942797383

printed perfect the first time. Great Job. Thank You for sharing.

The designer has replied

@JDJDJD

Thank you so much for the thoughtful note in your photo! 🥰

@Figo75

Print Profile

Smoothy V2 Mount 10x3mm Magnets

Looks Great

The designer has replied

@JDJDJD

Thank you for sharing your Smoothy photo @Figo75 !

@davidsdesigns

Print Profile

Smoothy V2 Mount 6x3mm Magnets

Fits the splitter perfect and holds it solid in place. Used Bambu Basic PLA Orange

The designer has replied

@JDJDJD

Great Smoothy Mount, enjoy @davidsdesigns !

@gillithonnen

Print Profile

Smoothy V2 Mount 6x2mm Magnets

Printed the 6x2mm magnets version, but ended up using the M3 x 8mm anyway. Printed in black PLA Basic without issue!

The designer has replied

@JDJDJD

That's a great looking Smoothy @gillithonnen !

(Edited)

@Fearless2325

Print Profile

0.2mm layer, 2 walls, 25% infill

printed really good and fits perfect.

@JDJDJD

Love it - enjoy your Smoothy! @Fearless2325

@brohhh

Print Profile

Smoothy V2 Mount 8x3mm Magnets

Awesome!

The designer has replied

@JDJDJD

Your Smoothy looks great, thanks for posting @brohhh !

@user_4040102525

printed the M10 version. Magnets and connectors coming in this weekend. Awesome design. Fits together perfectly. Thank you for sharing.

The designer has replied

@JDJDJD

Love how your Smoothy turned out - thanks for sharing @user_4040102525 !

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.