Supercat

Supercat

Thank you all for your support and print photos 💕

Update 2025/11/21:

Update print configuration: Supercat, PLA/PLA-Matte, 6-color split (optimized version)

• Improved the issue of visible layer lines on the face

Update 2025/11/16:

• Added new print configuration: Supercat, PLA/PLA-Matte, 6-color split (optimized version)
• Improved the loose fit issue of the shoes
• Improved support structures that were difficult to remove
• Optimized and reinforced several other areas
   

Introduction

Supercat— If you like it, just print it!

• Height: 20 cm
• 6-color split parts** (Black, Red, Blue, Yellow, Pink, White — or customize your own palette)
       

🧵Materials

• Recommended: PLA / PLA-Matte  (Looks great. If you wonder whether PETG works — yes, it does.)
       

🧩Printing Tips

• Some key parts are placed on separate plates to avoid cooling marks caused by other models.

• Supports and brims are properly optimized to balance print time and filament usage.

     

⚙️Assembly Guide

• Assemble according to the guide video
• The clearance is well-designed—no glue needed for a tight fit.
• Prepare a hobby knife and needle-nose pliers; sometimes technique helps, sometimes brute force.
• Confirm each part before inserting it—wrong placements may be hard to remove.
• Sit down, stay steady, and enjoy the build.
     

The following steps take some time. Put on some music you like, relax, and enjoy the fun of making. 🎶

🌟Final Words

From design to print verification and final completion, every project takes a tremendous amount of time.  
So remember to support any work you like—not just mine.  
Kind comments and print photos are the most direct encouragement for any creator.  
Happy printing! And feel free to leave suggestions if you have any.