This is a hueforge model of a warrior facing off with an oriental fire dragon. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA PolyTerra Charcoal Black Transmission Distance: 0.3

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Orange Transmission Distance: 5

Swap Instructions:

Start with Charcoal Black

At layer #11 (0.96mm) swap to Red

At layer #20 (1.68mm) swap to Orange for the rest.