Bambu Lab AMS Desiccant Tray
Eldon
Shared by
Copyright Claim
Bambu Lab AMS Desiccant Tray
Eldon
Shared by
Boost
135
248
93
Print Profile(2)
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
43 min
1 plate
No holes, smal supports 0.2mm layer, 2 walls, 15% infill
39 min
1 plate
Boost
135
248
93
0
865
714
Released
Description
great thx Eldon_342734 for this great work
Bambu lab AMS Tray to hold loose Silica Gel
Print Pairing (Look at the Folders and use V2 for old AMS and V4 for New AMS With longer tabs !)
Comment & Rating (93)
All
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
The top is Not so good
1
Reply
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
Support is easy to remove but overall print quality is not as good as printing directly from the original stl from the original author.
0
Reply
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
The lids didn't fit right. had to print a different set using a different plan.
1
Reply
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
Top does not latch or stay shut in any way.
1
Reply
Print Profile
No holes, smal supports 0.2mm layer, 2 walls, 15% infill
plain and simple, good
1
Reply
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
support un peu limite pour les couvercles mais ça tient. juste l'aspect de la pièce en contact sur ces supports qui n'est pas belle mais vu les pièces, ce n'est pas trop grave.👍
1
Reply
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
sehr gut
1
Reply
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
Workes
0
Reply
too thin
0
Reply
Print Profile
With hole, minimal supports 0.2mm layer, 2 walls, 15% infill
works great
0
Reply
The user shared this model, but is not the original creator of it.
License
This work is licensed under a
Creative Commons AttributionRemixes (1)
© 2024 MakerWorld