jonathan.penner

cover

20231210_110927_61456d61-7005-4710-8ce3-c54b85cfd6a1.webp

20231210_110940_ffa40a21-f5a2-41de-b4ed-ac84c21f5e95.webp

20231213_142309_624e9f46-aa90-4481-b78b-c69043c656a5.webp

20231129_181733_0bdd131f-2efd-41a5-8db0-e09cb1ed8001.webp

plate_1.png

plate_2.png

20231210_110917_a3434bbf-a1ff-4471-b2e2-d53459cf2d39.webp

plate_1.webp

plate_2.webp

Knitting loom for a hat with interchangeable pegs. Grooves in the pegs to allow for crochet hook or weeding tool use. <ul><li>Print 1x board and 42 pegs. </li><li>Recommend printing the pegs on their backs flat so the layer lines are perpendicular to the board when assembled.</li><li>Print with supports for the loop on the side. </li><li>When assembling, the grooves on the pegs should face towards the outside of the circle.</li></ul>

0.2mm layer, 2 walls, 15% infill

Sasani

loominuse1.png

loominuse2.png

loomfinishedhat.png

Loom.gif

Pins.gif

Changes:<ul><li>Scaled down everything by 88.25% to make smaller hats for prematurely born children (my mother donates them to hospitals).</li><li>She did quite a bit of thinking to figure out a good size for this purpose, so this is good for anyone else wanting to make small ones for charity.</li><li>She made the pictured hat very quickly, and loves how the loom turned out.</li></ul>Notes:The file includes the loom and pegs on two plates, but I use a P1S so the plates one at a time.

0.2mm layer, 2 walls, 15% infill, 88.25% size

3CM PEGS

BASE

Pedro Gomes

IMG_2265.jpg

I only increased the height of the loom pegs to 3cm, because when working with multiple strands, the standard 2cm peg makes it too tight.&nbsp;I recommend a tougher material, PETG should be enough.

3 cm pegs, 0.2mm layer, 2 walls, 30% infill

Hat Loom Knitting

Knitting loom for a hat with interchangeable pegs. Grooves in the pegs to allow for crochet hook or weeding tool use. <ul><li>Print 1x board and 42 pegs. </li><li>Recommend printing the pegs on their backs flat so the layer lines are perpendicular to the board when assembled.</li><li>Print with supports for the loop on the side. </li><li>When assembling, the grooves on the pegs should face towards the outside of the circle.</li></ul>

Knitting Loom

ASIA

Print Profile(3)

Description

Comment & Rating (74)

This remix is based on

License

Related Models