Helm stand

I 3D printed the Mandalorian helmet at 100% scale on the H2D. For this, I needed a stand that would properly illuminate the helmet. That's why I designed the model. Using the WLED software, the ESP 32 controls the outer and inner LEDs independently. This allows for various lighting effects to be set. The light can be controlled via the WLED-BASIC app or a remote control. Further information can be found on the WLED project page

Required Parts:   -  1 x ESP32 mini D1  USB-C connection    Amazon ASIN  :  B0D3X5RTVM

 Required Parts    -  1 x WS2812E BTF-Lightning        Amazon ASIN  :  B088FJF9XD

                                -  1 x TSOP4838 Amazon ASIN: B0CZHWVC89  optional

                                -  1 x 5v 1A power supply 
                                -  1 x USB-A to USB-C cable

I printed the Mandalorian helmet at 100% scale on the H2D. For this, I needed a stand that would illuminate the helmet properly. That's why I designed the model. Using the WLED software, the ESP 32 controls the outer and inner LEDs independently. This allows for various lighting effects to be set. The light can be controlled via the WLED-BASIC app or a remote control. Further information can be found on the WLED project page