This is a HueForge produced picture of Elvira, The Mistress of the Dark, using 4 colors.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

              PLA+ Sunlu Black Transmission Distance: 0.6

              PLA BambuLab Matte Scarlet Red Transmission Distance: 2

              PLA BambuLab Basic Beige Transmission Distance: 8

              PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:

              Start with Black

              At layer #10 (0.88mm) swap to Scarlet Red

              At layer #15 (1.28mm) swap to Beige

              At layer #19 (1.6mm) swap to Ivory White for the rest.