Search models, users, collections, and posts
swapmod A1M - plate hook v2
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
36 min
1 plate
Open in Bambu Studio
Boost
80
194
41
12
612
479
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
List other parts
- BambuLab build plate for A1 mini x 1: (use original plates)
- M3x4mm cylinder head screw DIN 912 or ISO 4762) x 1: (already included in the "swapmod" hardware kit)
Description
This hook-bar needs to be mounted on the build-plate in order to be used with swapmod automation add-on for BambuLab A1 mini printer. All needed screws are included in the “swapmod A1M Kit”.
INFO: Screw for this hook version are coming with the kits purchased at swap-systems shop AFTER 15.09.2025. If you have a kit with M2 screws and nuts, you will need to use a corresponding hook model (here) or source self tapping screws BT3x6 from BambuLab Maker's Supply store (here or here) or obtain similar screws from alternative sources.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (41)