You can also use this model https://makerworld.com/en/models/714415#profileId-645020 and customize it to your tin.

mirabatek

Thanks.  Now I need to find more tins.   

stoffies00711

Thank you.  Tins were available here in SA for a while with Fisherman's Friend mints. Same size although ours is about 4mm deeper.  Thanks again!

lbomb

3+1, 0.2mm layer, 2 walls, 15% infill

Super easy to print, the settings work just fine. Great little addition to my EDC.

Mister_Flippy

So useful. I printed this insert to hold my hotends. Fits the regular size layouts perfectly. Thanks for sharing.

applebuni

3x1, 0.2mm layer, 2 walls, 15% infill

Such a great way to make these tins reusable. I'm printing out inserts to make mini tackle boxes for my Cub Scouts pack!

Zman36

1+1+1, 0.2mm layer, 2 walls, 15% infill

Printed Great, very snug fit but after some wiggling I finally was able to get it into the Altoids tin. 

Bemme7

4x2, 0.2mm layer, 2 walls, 15% infill

user_1270088521

nice snug fit. no chance that the tray will fall out. would be nice to see these with rounded bottom corners. it’s hard to get small parts out of the chambers 

oldgregg

4x1, 0.2mm layer, 2 walls, 15% infill

my second ever print and it went well! thank you!

josh

All Inserts on Separate Plates - All Bambu Printers

cover

2024-02-10_7lp2mmuo7x42.jpg

2024-02-10_u66uvaa4x3lv.jpg

Altoids_Insert_1+3_58a8ae47-0278-436a-9f51-27c98617a0e9.webp

plate_1.png

1+3, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_3+1_26071b52-33e6-4653-8252-2e3e65c56361.webp

Altoids_Insert_1+1+1_269cf232-7882-4933-bc74-0dda189506b2.webp

Altoids_Insert_3x1_a88f4c6a-1098-4e9f-84fd-9aefadd87e13.webp

Altoids_Insert_2+1_9aa632d5-4336-4b47-8dce-56472d2025eb.webp

2x+1, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_2x1_4a1052f2-4207-4903-990a-ea7d13e5e837.webp

2x1, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_2x2_637f9098-f10f-4800-8604-70fe8e0c6193.webp

2x2, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_1x2_66ca8a93-ee04-4ee1-8270-a85d1dc3349a.webp

1x2, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_4+1_b2ac48b9-4e07-45be-a27d-5913b1d29727.webp

4+1, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_1x3_009e089e-67b6-48cd-bcca-e2811dc35509.webp

1x3, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_4x1_37ac4a85-5b12-40ed-bee9-092bf779362e.webp

Altoids_Insert_4x2_d50cd372-5cf5-43a8-92cf-09553955fd53.webp

Altoids_Insert_4x3_bb687b2e-3e40-42c8-8f86-2d72a20ec0ad.webp

4x3, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_2x3_44831f2a-33dc-4cd2-921e-f9a16f4ccdae.webp

2x3, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_3x2_759374c4-a0c1-4bcc-9373-5b0159fd0a38.webp

3x2, 0.2mm layer, 2 walls, 15% infill

Altoids_Insert_1x1_31fd423b-2be1-4c46-bc7a-7a921147a554.webp

1x1, 0.2mm layer, 2 walls, 15% infill

IMG_9679.JPG

plate_2.png

plate_3.png

plate_4.png

plate_5.png

1+1+1

plate_6.png

plate_7.png

plate_8.png

plate_9.png

plate_10.png

plate_11.png

plate_12.png

plate_13.png

plate_14.png

plate_15.png

plate_16.png

barbasnoo

I took these incredible designs, and merged them all in to a single profile with separate named plates. I made it A1 Mini compatible. I adjusted a few print settings to clean up the edges of the exterior wall, since it's meant to fit inside a small altoids case.&nbsp;

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like my work, please give this model a boost to fuel my creativity and inspire even more unique 3D creations for you.</boostcontent></boostme>This is set of various inserts which fits into a standard Altoids tins (inner size ~90 x 55 mm). You can choose the layout to fit your needs. They can be used to store bolts and nuts, pills and other small components or for example as EDC box.The inserts are designed for tight snug fit. If you would like to pull them out regurarly scale them down a little bit in the slicer.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179516/design/2024-02-10_0wcdia2hs4mr.png"></figure>If you didn&#39;t find the insert you need you can check the second set <a target="_blank" href="https://makerworld.com/en/models/682618#profileId-611167" rel="nofollow noopener">here</a>.<figure class="image image_resized" style="width: 59.99%"><a href="https://makerworld.com/en/models/682618#profileId-611167" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179516/design/2024-10-05_99a5186968fe4.png"></a></figure> If you are interested in different layout  you can use my<a target="_blank" href="https://makerworld.com/en/models/714415#profileId-645020" rel="nofollow noopener"> Customizable Tin Insert</a> model or send me a message.  <figure class="image image_resized" style="width: 70.09%"><a href="https://makerworld.com/en/models/714415#profileId-645020" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179516/design/2024-10-19_5c1a134ea0924.png"></a></figure>&nbsp;If you don&#39;t have enough Altoids tins or they aren&#39;t available in your country, you can create your box using just the insert and my lid which you can find <a target="_blank" href="https://makerworld.com/en/models/683112#profileId-611700" rel="nofollow noopener">here</a>.<figure class="image image_resized" style="width: 60.05%"><a href="https://makerworld.com/en/models/683112#profileId-611700" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000179516/design/2024-10-07_58698e4a578d2.jpg"></a></figure>&nbsp;&nbsp;

Altoids Tin Inserts

Global

Print Profile(17)

Description

Comment & Rating (162)

License

Related Models

Altoids - Folding Cribbage Board (Print In Place)

Altoids Tin Can Coin insert

Altoids tin inserts

Altoid Tin Skin - Add Your Own Text