Quick release mount for the Creality accelerometer. Two mounts - toolhead and bed.

Need:

• x2 - M3x6mm FHCS screws (toolhead mount)
• x2 - M3x10-12mm screws (accelerometer)

Use the two original screws from the toolhead for the bed mount (M3x4mm FHCS)

Print Settings:

• 0.2 layer height
• 0.4 line width
• 2 walls
• 3 top/bottom
• 15-20% infill
• No supports needed

If you like my work consider buying me a ko-fi ☕😊 Your support is greatly appreciated.

My Github