Cable Clip

A compact cable clip that keeps charging leads and peripherals neatly routed on your desk, shelf, or charging station. The model is oriented to print flat on the base and is designed to avoid supports on most printers for a quick, clean result.

Highlights

• Prints flat • usually no supports
• Small footprint • low material use
• Flat base suited for double-sided tape (3M/VHB) or hot glue
• Rounded entry for easy cable drop-in
• Minimal look that blends in at home or the office

How to use

1. Clean the mounting surface (isopropyl alcohol works well).
2. Apply a strip of double-sided tape to the flat base.
3. Press the clip in place and route the cable through the slot.

Recommended print settings

• Layer height: 0.20 mm
• Perimeters: 3
• Infill: 15–20% (grid/gyroid)
• Material: PLA/PLA+ (PETG if you want extra toughness)
• Orientation: base down • brim not needed in most cases

Tips & customization

• If your cable is a bit tight/loose, scale XY by 5–10%.
• For semi-permanent mounting, use VHB tape; for temporary, use poster tape or hot glue dots.
• Need a screw-mount version or a different channel width? I can generate a variant.

Includes

• Clip_2.3mf project file (ready to slice).

License/Remix

• Free for personal use and remix—credit appreciated 🙌