I designed these to give away on an upcoming Disney cruise I'm taking with my family. They're little miniature ice cream bars, each measuring just under 3" (long including the stick).

Colors used: Bambu Lab Basic Brown, Bambu Lab Matte Desert Tan, Bambu Lab Basic Jade White

The print is designed with each part printed separately and then snap / glued together, but a painted single object profile is included as well. They are designed with a space for a ½ inch diameter ceramic magnet, but you can easily adjust the size of the magnet using Bambu Desktop (See photo). Simply go into the “Objects” view, select the cylinder in the assembly, and scale it to the size of your magnet. Then move it down so it's touching the build plate / bottom of the model.

There are three different print profiles:

• Each object on a separate plate. This is what you want to use if you're making multiple at once, as you can easily select the plate and then increase the quantity in the Bambu Handy app. Up to 9 “chocolate” magnets will fit on one plate of an X1C / P1S / A1
• All three objects on the same plate, with “print by object” enabled. If you have an AMS this allows you to print everything in one pass with minimal waste
• A single painted object. As-is this has a fair amount of waste due to the color changing. However you can fit up to 7 on one plate and printing more at once will waste less filament. There is roughly 20g of waste when printing 1, but only 12 g of waste when printing 7 because more of the flushed material can go to infill.

Commercial licensing for all of my designs is available over at Thangs. Please visit my Thangs profile or message me for more information.