Second veesion, this time in flowers
created with filament painting technique using hueforge software.
Remember if you want to scale, do it only with x and y axis, z must be the same as original.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Beige
At layer #18 (1.52mm) swap to Jade White for the rest.
Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Check out my recent yin yang project https://makerworld.com/en/models/210710#profileId-230551 in theme of bees.