Yin yang v2 huefofge by Bunk.Wire

Bunk.Wire

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

0.08mm layer, 1 walls, 100% infill

Designer

1.8 h

1 plate

5.0(8)

0.04mm layer, 1 walls, 100% infill

6.4 h

1 plate

Open in Bambu Studio

Boost

279

395

603

166

Released

Description

Second veesion, this time in flowers

created with filament painting technique using hueforge software.

Remember if you want to scale, do it only with x and y axis, z must be the same as original.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5

    Start with Black
    At layer #6 (0.56mm) swap to Blue Gray
    At layer #15 (1.28mm) swap to Beige
    At layer #18 (1.52mm) swap to Jade White for the rest.

Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually

Check out my recent yin yang project https://makerworld.com/en/models/210710#profileId-230551 in theme of bees.

hueforge

ying yang

yingyang

Comment & Rating (31)

@M.verbeke

Print Profile

0.08mm layer, 1 walls, 100% infill

It looks amazing from a little distance. From a closer look I am missing a bit of depth. I printed it a second time, scaled the height to 4.2mm (about the double size) adapted the color shifts and also reduced the layer height to 0.04mm te ensure I am not losing any details. It looks good to, but I am not sure whitch one I like more? can you guess which is which?