Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
PLA BambuLab Basic Brown Transmission Distance: 2

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Mandarin Orange
At layer #8 (0.72mm) swap to Gray
At layer #9 (0.8mm) swap to Marine Blue
At layer #11 (0.96mm) swap to Jade White
At layer #17 (1.44mm) swap to Silver
At layer #18 (1.52mm) swap to Ice Blue
At layer #21 (1.76mm) swap to Brown for the rest.