Tridense

cover

2023-09-22_i8y7kstbydcd.png

plate_1.png

20230903_134518.webp

plate_1.webp

1 clip, 0.2mm layer, 2 walls, 15% infill

5 clips, 0.2mm layer, 2 walls, 15% infill

Link_9

d6548238ff6aba5bcc76d0730389235_41a60464-62c1-4e38-a31e-f8dd22f6482f.webp

0.2mm layer, 2 walls, 15% infill

IMG_5833_b5a3ae47-f3fe-490c-97c5-46b7ca3a9a87.webp

I needed smaller clips so scaled this to ⅔ the original size: Now 12x17x50 MMS or around 1/2" x 5/8" x 2". There are 3 in this plate. If you need fewer then click on choose parts in Bambu Handy and remove some.

3 Smaller Clips 0.28mm layer, 3 walls, 15% infill

Wick3D

V12xVersion_67a93112-aa3e-4d9d-a8b8-46d3366f89e9.webp

Thanks to the Designer for this Upload! First I printed 1 piece of this and could see how nice it is. Then I decided to print the “5x Clips” version and it worked also very well! After a short checkup on BambuStudio there I could see that the time per object is less if i put more on the plate. So I need much more in a short time, I wanted to share this profile with 12 pieces per one print process :) Hopefully someone could also need it. Thank you :)

12x Clips @Standard BBL - 0.4mm layer, 2 walls, 15% infill

<h4>Simply slide the cable into the clip</h4> Mount under your desk with two screws <ul><li>Inside dimensions 67x17mm</li><li>Screw holes are 37.5mm apart center to center</li><li>Max screw width 5mm</li><li>Max screwhead width 10mm</li></ul>

Simple Cable Clip

ASIA

Print Profile(5)

Description

Simply slide the cable into the clip

Comment & Rating (210)

License

Related Models