UPDATE:

Due to some problems encountered, I advise you in the end, after having followed all the steps, to use the "scale" command on bambustudio and scale the model to 130%

SpotyHeart, the customizable Spotify code Keychain:

Model made by me, i used 4 colors (Red White and Black = Sunlu PLA+, Green = Bambu PLA Basic) but you can print it with as many as you want 😎

By default you can print mine with “Never Gonna Give You Up” on it, if you want to customize the keychain with your song you can follow my tutorial below

Are required for this customization:

• Fusion360
• Bambu Studio

If you can't do it or don't have Fusion360, you can send me a message and i will make the model for you :)

How to make your custom keychain:

- Find the spotify song, click on “share” and “copy link”

- Go to this website (https://www.spotifycodes.com/)
 

- Paste your link and click on "Get Spotify Code"
 

- On "Format" select "SVG" and click “DOWNLOAD”

- Open Fusion360, go to Insert > insert SVG > "Open from my computer" and select the SVG file you downloaded

- Select the horizontal plane

- Before you click “OK”, you have to modify "Scale" parameter, put “0.575989”

- Now press "E" on your keyboard and select all tiles by left clicking on them

- Extrude the tiles by 3mm and press "OK"

- In the solid tab click on “Modify” and then “Combine”

- Select all tiles, make sure that the "New Component" is enabled and press “OK”

- On the left tab right click on "Component 1:1" and click on "save as mesh"

- Copy settings from the screenshot below and click "OK"

- save your STL file on Desktop

- open “SpotyHeart_keychain.3mf” on Bambu studio

- On process tab switch from Global to Objects

- Right click on "Componente1.stl" and select "replace with STL"

- Select your STL file from the desktop and click "OK"

- Slice the plate and print :)

I hope this is useful to you, leave me some feedback so I can improve this design 😊