Smoking Cat - Hueforge
Print Profile(2)
Description
Smoking Cat Hueforge 200x200 → Only 2 Colors
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size, you can scale it down if you want!
You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 1.76mm and the Actual Thickness is 1.76mm
Filaments Used:
→ PLA BambuLab Basic Black Transmission Distance: 0.6
→ PLA BambuLab Basic Jade White Transmission Distance: 5
(Instead of the white you can use glow filaments or shiny ones. Post pictures if you use cool stuff!)
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Jade White for the rest.
Hope you enjoy! Thank you!
Also don't forget to post pictures after you printed this Hueforge :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)