由于福如东来有点过于方正，修改了这个版本，增加白色内衬使得看起来图案清晰。

建议使用默认配置打印即可，红色可以使用petg或者pla+，需要一定韧性，

坠子连接器也需要韧性材料，打印完成后，用钳子剪出个口子套进去即可。

蜡烛是通用的电子蜡烛，可以淘宝或者pdd购买，圆形通用电子蜡烛即可。

棍子没有再去做专门设计，直接使用了小鱼智选的灯笼棍子。

白色内衬可以使用烙铁焊接，会更加结实美观，烙铁200度，按一下即可。也可以使用透明petg打印内衬，透光效果会更好

petg透明内衬（左）petg 白色内衬（右）效果对比

0214更新：

修正灯笼面有一个灯笼和坠子不相连问题。

0216更新：

灯棍头修改螺丝开孔，增加栓绳螺母，方便栓绳

Because Fu Rudonglai is a bit too square, this version was modified and a white lining was added to make the pattern look clear.

It is recommended to use the default configuration for printing. For red, you can use petg or pla+, which requires a certain degree of toughness.

The pendant connector also requires tough material. After printing, just use pliers to cut a hole and put it in.

Candles are universal electronic candles, which can be purchased on Taobao or pdd. Round universal electronic candles are sufficient.

There is no need to specially design the stick, and the lantern stick directly used by Xiaoyu Zhixuan is used.