Schneckenkragen / Snail Collar
Boost
11
36
16
Print Profile(4)
A: 0.2mm layer, 2 walls, 15% infill
Designer
3.7 h
1 plate
B: 0.28mm layer, 2 walls, 15% infill
Designer
2.5 h
1 plate
C: 0.28mm layer, 2 walls, 15% infill
Designer
3 h
1 plate
D: 0.6mm nozzle, 0.42mm layer, 2 walls, 15% infill
Designer
1.7 h
1 plate
Open in Bambu Studio
Boost
11
36
16
7
120
78
Released
Description
Schneckenkragen zum Schutz von Pflanzen vor Schnecken.
Gedruckt mit PETG - PLA ist aufgrund der Wärme durch Sonneneinstrahlung nicht zu empfehlen.
Ich habe insgesamt 4 Profile eingestellt:
- A: 0.2 mm Layerhöhe - Wandstärke 1.8mm
- B: 0.28 mm Layerhöhe - Wandstärke 1.2mm um Druckzeit und Material zu sparen
- C: 0.28 mm Layerhöhe - Wandstärke 1.8mm
- D: 0.6 mm Düse, 0.42 mm Layerhöhe
____________________________________
Snail collar to protect plants from snails.
Printed with PETG - PLA is not recommended due to the heat caused by sunlight.
I have set a total of 3 profiles:
- A: 0.2 mm layer height - wall thickness 1.8mm
- B: 0.28 mm layer height - wall thickness 1.2mm to save printing time and material
- C: 0.28 mm layer height - wall thickness 1.8mm
- D: 0.6 mm nozzle, 0.42 layer height
Comment & Rating (16)
All
Print Profile
C: 0.28mm layer, 2 walls, 15% infill
Versuche es im Hochbeet mal mit PLA+ meine Kohlrabipflanzen zu retten, drückt mir die Daumen :)
The designer has replied
0
Reply
Viel Erfolg und Danke für die Bewertung.
0
Reply
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
0
Reply
Boosted
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
sehr gut und hilfreich
(Edited)0
Reply
Boosted
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
Super Kragen perfektes Modell
0
Reply
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
Perfect print
0
Reply
Boosted
Print Profile
B: 0.28mm layer, 2 walls, 15% infill
Prints well in PETG and PLA. Tank you
0
Reply
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
top
0
Reply
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
A: 0.2mm layer, 2 walls, 15% infill
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld