A “Peeking Husky” designed in Fusion 360. There is the main body which is printed face down at a .2 layer height, then the back panel which is printed face up at the same layer height. The back panel has two cutouts for the USB-C connected to power the internal LEDS that are placed around the 10mm lip of the back plate, as well as a switch to turn the lights on and off. Links for the USB-C connector, Switch, and LEDS I used are below. There is also an optional diffuser component that can be used if pinholes are present, but the included profile should eliminate most/all of them. There is also a seperate backplpate with no cutouts so that you made add your own. The name can be customized by importing the .STEP file into fusion and editing the text on either the NAME component or sketch.
Link for LEDs, Switches, and other components used: https://bit.ly/m/Additive-Imprints