Print Profile(1)
Description
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 50 x 140mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#9d432c PLA BambuLab Basic Brown Transmission Distance: 2
#ff8000 PLA BambuLab Basic Orange Transmission Distance: 7
#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Brown
At layer #13 (1.12mm) swap to Orange
At layer #16 (1.36mm) swap to Sunflower Yellow for the rest.
Membership
Would you like to monetise my prints? Become a member!
Boost Me (for free)
Like my Models? Boost me!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)