Knights Game / Balloon Battle by DHCDLT

DHCDLT

Toys & Games>Other Toys & Games

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

6.6 h

4 plates

4.4(10)

0.16mm layer, 2 walls, 15% infill

Designer

9.5 h

5 plates

3.8(4)

0.16mm layer, 2 walls, 15% infill

4.6 h

4 plates

0.16mm layer, 2 walls, 15% infill

10 h

5 plates

Open in Bambu Studio

Boost

163

316

226

237

Released

Description

Hello everyone I have constructed a knight game.

You can print everything print in place .

For the swords I used needles that are 40 mm long and then glued the swords together with second glue.

I recommend you to use mini balloons because they burst better.

And now I wish you lots of fun with my model.

May the better knight win and not lose his head.

Comment & Rating (26)

@erdemaksu986

can you make such a design?

The designer has replied

@DHCDLT

Yes, that should be feasible. But I think the nails would be very difficult to print because of the length. They shouldn't be too long . Or the corresponding thickness. Maybe I'll design it when I have time. Then I'll let you know.

@erdemaksu986

Thank you in advance 🥳

@lloyd1337

Replying to @DHCDLT :

cut the nails in half and assemble after

@badbrain3000

Print Profile

0.16mm layer, 2 walls, 15% infill

the knights printed well I used PLA-CF fort he black one and I don't recommend. PLA gives a lot more flexibility to the movement of the knights. I had issues with the printing of the swords making spaguetti, putting the speed down to 50% (silent mode) made it work

@Thomasringdal

Print Profile

0.16mm layer, 2 walls, 15% infill

@tyljon1013

Boosted

fun little spin on rock em sock em

The designer has replied

@DHCDLT

Many thanks for the boost. It makes you happy when someone appreciates the work you have done.

@komengjher

Print Profile

0.16mm layer, 2 walls, 15% infill

Strength Issue:the joints need to be stronger

The designer has replied

@DHCDLT

@komengjher Could you describe your problem in more detail ? perhaps I can help you further. I had no problems with my PS1. And my prints have no problems with their joints. What material did you use? Did you use my print profile and pla? Please also remember that you are reviewing the model and not your printer settings.

(Edited)

@Czapson

print it with stronger material or little bigger

@bretconrad

You can make it stronger by increasing walls, and infill. Great model btw,

@tyljon1013

Boosted

fun little spin on rock em sock em

@xxCLAPSxx

Print Profile

0.16mm layer, 2 walls, 15% infill

to small and the articulation isn't the greatest but it works! highly recommend a better sword design

@alexander.sivil

Print Profile

0.16mm layer, 2 walls, 15% infill

Small issue with the knights fitting together, however thats due to elephant footing on my end - not specfically the model. If your filaments are tuned better then mine you should have no issues getting them together, but they might break during usage. I'm contemplating printing a small rectangle then glueing the knights onto that.

@forwardjoshua

Print Profile

0.16mm layer, 2 walls, 15% infill

printed fine

@Papa_Potter

Print Profile

0.16mm layer, 2 walls, 15% infill

AWESOME

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(4)

Description

Comment & Rating (26)

License

Related Models

Balloon dog² (Squared / Geometrical)

hot air balloon earring

Batwing from The Dark Knight Rises

Foot Pump for Inflatables