This is my first HueForge project. I chose to replicate an image of the LOTR Power Ring on the Middle Earth map.

For the painting, the filaments used are:

- PLA BambuLab Matte Charcoal Transmission Distance: 0.6
- PLA BambuLab Matte Dark Brown Transmission Distance: 2
- PLA+ filoalfa orangeyellow Transmission Distance: 2
- PLA BambuLab Matte Ivory White Transmission Distance: 4"

For the frame, with the addition of the towers of Barad-dûr and Orthanc, the filaments used are:

- PLA BambuLab Matte Charcoal Transmission Distance: 0.6
- PLA BambuLab Matte Dark Brown Transmission Distance: 2
- PLA+ filoalfa orangeyellow Transmission Distance: 2
- PLA BambuLab Matte Ivory White Transmission Distance: 4

PLA+ Filoalfa xmas red Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8

For the frame, if you use a AMS you have to swape the brown with the yelloworange and the Beige with the red between layers 251 and 254