F1 Front Wing 2026

This Model is designed after images of 2026 F1 concepts. It has no direct correlation to a specific team.

The model is made of 16 different pieces which were glued together. The gaps and imperfections were smoothed out using DAP plastic wood, any other filler would work as long as it isn't filled with grains.

Overall Dimensions: 44 Inches wide. 34 Inches tall.

Total Print time is around 3.5 days

Total Material used is 3620 g.

Total cost including all materials to finish the sculpture was $65. This includes filament, primer, paint, filler, and glue. 

I printed this model using 1 Elegoo PLA filament bundle found on amazon(4 rolls for $45 USD).

Tips for anyone that wants to try this:

I used a CA Superglue which worked very well and seems to hold it together as if it is 1 giant print.

When gluing use an activator to help get tighter tolerances between pieces.

you can never spend too much time sanding and preparing the surface. I spent around 15 hours sanding and filing any abnormalities or high spots on the print… if you look closely you can tell, I didn't spend enough time.

Reach out if you have any questions about the project especially if you are wanting to try it yourself!