Fed Up Crows

Project: fedup.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.24mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ffffd9 PLA+ ESUN BONE WHITE  Transmission Distance: 4.8
    #00007f PLA elegoo mattre navy blue  Transmission Distance: 0.2
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #ffff7f PLA elegoo matte sunshine yellow  Transmission Distance: 4.8
    #ffaa7f PLA ANYCUBIC PEACH FUZZ  Transmission Distance: 4.1
    #4b000e PLA HS ESUN FIRE ENGINE RED  Transmission Distance: 3
This print uses 7 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #17 (0.8mm) swap to BONE WHITE
    At layer #23 (1.04mm) swap to mattre navy blue
    At layer #24 (1.08mm) swap to Blue Gray
    At layer #28 (1.24mm) swap to matte sunshine yellow
    At layer #31 (1.36mm) swap to PEACH FUZZ
    At layer #37 (1.6mm) swap to FIRE ENGINE RED for the rest.