Wolverine - Hueforge

Wolverine - Hueforge

Boost
15
25
3

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

Adaptive Layer Heights 0.08mm layer, 2 walls, 100% infill
Adaptive Layer Heights 0.08mm layer, 2 walls, 100% infill
Designer
6.7 h
1 plate

Open in Bambu Studio
Boost
15
25
3
1
22
7
Released

Description

I've turned the cover art to “Wolverine - Black white and blood” into a hueforge 3D print.

 

I have assigned the model to have a variable layer print height, which means that the first 4 layers of the model will print with a 0.16 layer height, and switch to a 0.08 layer height for the details. If you use my uploaded print profile this will save you time on your print as the first 0.64mm is just to provide stability to the print for display.

Final Size is 200x200mm
If you resize the model from 200 x 200 make sure you do NOT scale the Z axis or the print colours will not be in the same position

 

Please post a picture of your printed copy! I'd love to see it!

 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sunlu Black Transmission Distance: 10
PLA Overture Red Transmission Distance: 5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA Overture White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Latte Brown
At layer #22 (1.84mm) swap to White for the rest.

 

Comment & Rating (3)

Please fill in your opinion
(0/5000)

this is a great looking print. I’m having issues uploading some of my hueforges as it says it takes too long to slice. are you running into that at all?
The designer has replied
0
Reply
I have only had that for one file, and that specific hueforge gave me an error with manifold edges as well, so it took my slicer almost 20-30 minutes to fix the manifold edges before I could even slice it to print, so when it failed to upload I just attributed it to that issue I had.
0
Reply
Ohh I collected your punisher upload, its on my list to print, it looks great!
0
Reply
No more