Here is what can become your little gift to a person with a passion for reading and books.

My original designs have the quotes as a cut in the bookmark (0.4 mm) - that's why I chosed to add a color change at layer in the profile. ( you can change the color as you wish).

Also, in my profiles I used nozzles of 0.2 mm since the quality of text will be wonderfull – you can also use 0.4 but you will have a small decrease into quality.

For a bettter quality, you can use iron on the top layer … I prefered to not use it for mine, but I've made some test and it turns out great.

Since I know that a lot of you prefer to print multicolor so not to have that cut in the bookmark, I've also added a plain bookmark on which you can write your text using BambuSlicer.

It should be straight forward.

Finally, there are multiple quotes variants-- if you download the RAW files you will find them all including the Plain one.

Hope you will enjoy that - share your prints with the community