Search models, users, collections, and posts
Harmonica holder
IP Report
Print Profile(1)
0.2mm layer, 6 walls, 25% infill
Designer
4.9 h
2 plates
Open in Bambu Studio
Boost
90
214
17
2
321
215
Released
Description
This is just a simple harmonica holder but it should work with most of the diatonic harmonicas. I checked it with my Hohner Silverstar and some unbranded ones. It could even work with different sizes and shapes (It works with my Hohner Puck).
Printing
Just print it with standard settings for 0.2mm layer height. You need two pieces of small-bolt and two hinge-bolts. Three other parts should be printed once. I used PLA but it should work with PETG and other materials.
Assembly
Assembly is straightforward. Just connect everything with 3d printed bolts as shown on the pictures.
Mounting harmonica
Depending on you instrument, It can be mounted just by pressing or you need to loosen the small bolts a bit.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (17)