Vegetto️️
Print Profile(1)
Bill of Materials
Description
Boost Me (for free)
👉 "Ton soutien change tout ! Si tu kiffes ce projet, n’hésite pas à le booster, à laisser un like et un petit commentaire. Ça motive de ouf ! 🙌" 💪 "Your support makes all the difference! If you enjoy this project, feel free to boost it, drop a like and leave a comment. It really keeps the energy up! 🙌"
Project: vegeto.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 112.52x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.16mm
Filaments Used:
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00358e PLA BambuLab Basic Blue Transmission Distance: 4
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Turquoise
At layer #14 (1.2mm) swap to Black
At layer #15 (1.28mm) swap to Red
At layer #17 (1.44mm) swap to Yellow
At layer #20 (1.68mm) swap to Jade White for the rest.
-----------------------------------------------------------------------------------------------------------
Projet : vegeto.hfp
- Infill : 100%
- Hauteur de couche : 0,08 mm
- Première couche (base layer) : 0,16 mm
📐 Dimensions du modèle : 112,52 x 200 mm
👉 Tu peux imprimer avec une hauteur de couche plus grande tant que ça reste en dessous de l’épaisseur de base : 0,48 mm.
👉 Épaisseur max autorisée : 2,48 mm | Épaisseur réelle : 2,16 mm
Filaments utilisés (6 couleurs) :
- Noir (#000000) PLA BambuLab Basic Black – Distance transmission : 0,6
- Bleu (#00358e) PLA BambuLab Basic Blue – Distance transmission : 4
- Turquoise (#00b1b7) PLA BambuLab Basic Turquoise – Distance transmission : 1,4
- Rouge (#c00d1e) PLA BambuLab Basic Red – Distance transmission : 4
- Jaune (#fce300) PLA BambuLab Basic Yellow – Distance transmission : 6
- Blanc jade (#ffffff) PLA BambuLab Basic Jade White – Distance transmission : 5
Instructions de changement de filament :
- Commencer avec Noir
- À la couche n°8 (0,72 mm) → passer au Bleu
- À la couche n°12 (1,04 mm) → passer au Turquoise
- À la couche n°14 (1,2 mm) → repasser au Noir
- À la couche n°15 (1,28 mm) → passer au Rouge
- À la couche n°17 (1,44 mm) → passer au Jaune
- À la couche n°20 (1,68 mm) → passer au Blanc Jade → garder ce filament jusqu’à la fin.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)