Lorcana Lore Counter
Remixed by
Copyright Claim
Lorcana Lore Counter
Remixed by
Boost
45
61
32
Print Profile(4)
Painted Lorcana Counter Side Panels
Designer
46 min
1 plate
Lorcana Counter Spindle
Designer
25 min
1 plate
Lorcana Counter Rings
Designer
33 min
1 plate
0.2mm layer, 2 walls, 15% infill
3 h
3 plates
Open in Bambu Studio
Boost
45
61
32
7
115
150
Released
Description
Equip yourself for epic Lorcana adventures with your trusty deck and these lore counters. Let the magic unfold!
Overview
Keep track of your lore with these convenient lore counters. Each counter features snap-together assembly for easy use and visual tracking of your game progress.
Parts count: 5
Key Features
- Snap-together assembly
- Easy visual tracking
- Painted Model
Printing Details
Recommended filaments:
- eSun PLA+ used in the photographed example
Hotend: 0.4mm Hardened Steel
Print time: 1hr
Printing Tips:
- This should print quite easily with all materials, without any brim, raft, or supports.
- All parts print well with 0.2 mm resolution.
Assembly
Print one each of the left and right side, one spindle, and two rings. The left and right end pieces fit very tightly onto the spindle on purpose. You should still be able to remove the ends with some force if needed.
Comment & Rating (32)
All
Boosted
Print Profile
Painted Lorcana Counter Side Panels
Thanks for the design/remix!
The designer has replied
0
Reply
Those look great! Love the paint job, you should add the profile!
0
Reply
Love this! Printed off a few last night, and even made one special for Illumineer's Quest with red numbers for when the bad things happen.
0
Reply
Boosted
Print Profile
Lorcana Counter Spindle
Printed perfectly!
0
Reply
Boosted
Print Profile
Painted Lorcana Counter Side Panels
turned out great. gold and blue silk PLA with some silver paint. moves good too!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
worked wonderfully
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
It's a really beautiful model despite some little defaults happened during the print ! It works perfectly ! 😍
I should have used à 0.2 Nozzle 😁
0
Reply
Print Profile
Lorcana Counter Rings
0
Reply
Boosted
It seems that you included twice "Lorcana Right v1.step" in the "Side Panels", instead of one left and one right panel.
The designer has replied
0
Reply
Thanks for the heads up ill amend, if you need it faster than I can get to it, you can use the print profile or mirror the piece on the z axis
1
Reply
Boosted
Replying to @warrell72
There is the same problem in the print profile, and I can't mirror the piece without mirroring the logo, so I'll wait ;)
0
Reply
Replying to @Tanguy
All updated now, should be OK
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Printed these for the brother in law & niece and they loved them!
0
Reply
Boosted
excellent project
0
Reply
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld