Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:

If you don't have a AMS, just pause on specified layers and swap filament manually.

Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #14 (1.2mm) swap to Silver
At layer #20 (1.68mm) swap to Jade White for the rest.