This model has been carefully designed to look great with 8 colors.
It is ok if you do not have the exact same color, any closest shade will still look amazing.
This is an easy to print 8 color Filament painting to add to your other Halloween decor.
Only filament swaps! No AMS necessary.
This does not need an AMS to print, but it does make it easier.
This can be printed with 1 AMS as well :
When starting the print select
5th color : slot A1,
6th color : slot A2,
7th color : slot A3,
8th color : slot A4
When you are done printing the a specific slot, swap out the color.
If you have an AMS, print directly from the provided print profile.
If you don't have an AMS, open and slice in the Bambu Studio app and add pauses at the provided layer heights for filament swaps.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ JAYO Black Transmission Distance: 0.8
PLA+ IIID Max Navy Blue Transmission Distance: 4
PLA+ Sainsmart Matte Red Transmission Distance: 1
PLA+ IIID Max Light Blue Transmission Distance: 2.6
PLA+ 3DHoJor Yellow Transmission Distance: 4.4
PLA+ Creality Fl Orange Transmission Distance: 8
PLA+ IIID Max Tan Transmission Distance: 4
PLA+ IIID Max White Transmission Distance: 7
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Navy Blue
At layer #12 (1.04mm) swap to Matte Red
At layer #14 (1.2mm) swap to Light Blue
At layer #20 (1.68mm) swap to Yellow
At layer #22 (1.84mm) swap to Fl Orange
At layer #24 (2mm) swap to Tan
At layer #27 (2.24mm) swap to White for the rest.