Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA+ Esun Black Transmission Distance: 0.6
PLA+ Esun Grey Transmission Distance: 2
PLA+ Sunlu Coffee Transmission Distance: 3
PLA+ Esun Bone White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Grey
At layer #14 (1.2mm) swap to Coffee
At layer #19 (1.6mm) swap to Bone White for the rest.