GIF

Bricks Wolverine


Print Profile(1)

0.2mm layer, 2 walls, 5% infill
0.2mm layer, 2 walls, 5% infill
Designer
X1 Carbon, P1S, P1P, X1, X1E, A162.8 h
4.6

107
180
27
304
128
Released
Copyright Claim
Model
Comment & Rating
Remixes
Related Models

Description

https://www.patreon.com/waltersworld

 

Be sure to check out our Patreon for all newly released models, monthly giveaways, and the opportunity to have models designed custom for you

 

🔥 Unleash the Ultimate Collectible: 3D Printed Bricks-inspired Wolverine! 🔥

 

🎬 Celebrate the Epic Finale of Deadpool 3 Filming! 🎬

 

Attention Marvel Fans and Collectors! Commemorate the historic wrapping of Deadpool 3 with our exclusive 3D Printed Bricks-inspired Wolverine! Standing at an impressive 9 inches tall, this meticulously crafted masterpiece captures the essence of everyone's favorite adamantium-clawed mutant.

 

Key Features: 🔷 Impeccable Design: Precision-engineered to embody the iconic look of Wolverine, complete with removable mask for a customizable display. 🔷 Modular Construction: Plates separated for maximum efficiency in time and material usage, ensuring a high-quality collectible at an unbeatable value. 🔷 Deadpool 3 Tribute: This limited edition Wolverine serves as a tribute to the conclusion of the Deadpool 3 filming – a must-have for any Marvel enthusiast.

 

But that's not all! Explore our other sensational creations: 🔥 Deadpool: The Merc with a Mouth comes to life in stunning detail! 🔥 Weapon X: Witness the transformation with our captivating Weapon X model!


License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Comment & Rating (27)

Please fill in your opinion
0/5000

Top of the head doesn't fit on the hair, not sure it's normal. I've upscaled all parts to 150%. The top of the head measure 35.57 and the hole inside hairs only 34.86mm Same issue with the hole on the head, 35.5mm and the top of the chest 36mm.
The designer has replied
0
Reply
I’m sorry, I cannot speak to your scaling. :( it passed my print test as uploaded and lots of others’. best I can advise is to scale the hair (and mask) a bit larger than 150% :( I don’t know if sanding will even get you the needed clearance if it’s really that far out.
0
Reply
Replying to @waltersworld3d :
Sadly nothing fit, I've printed the hand and the claws, they doesn't fit together. The hairs and head doesn't fit either, I've had to redesign the head (I also wanted a much round head to have a perfect circle) and use a heat gun to add clearance on the hairs to have the parts fit together more or less correctly. The inside of the mask is very strange too. It's an amazing model that would have been perfect with more clearance between parts.
0
Reply
again, I cannot speak to any scaling you may have done. all I can say is that many, many, many others have been printed at the size I uploaded and none have complained about the issues you’re having. 😥
0
Reply
Amazing Minifig model, I love it. The model quality is amazing, highly detailed, except the top of the legs and the hips. Any reason why they aren't perfect like the rest of the model ? (to allow the legs to stay in place ?) Could it also be possible to have the head with the beard as a separated part of an assemble ? I'd love to add fuzzy skin just on this part, but sadly I can't split this object in parts in the slicer. Many thanks in advance Regards
(Edited)
The designer has replied
1
Reply
the legs are held in place by friction between the leg holds and the hip pegs, the area in the photo looks like a miscalculated facet, but it will be hidden once assembled and is not visible in a standing position. considering additional accessories and heads for models going forward, definitely! thank you for your feedback! 😃
1
Reply
Replying to @waltersworld3d :
That's what I thought, that was hard to believe you made such a mistake when we see the high quality of the model. Regarding the fuzzy skin, I've separated all the parts inside the slicer with boolean operations, and sadly the slicer isn't handling well such a mix..... A possible solution will be to make the beard much thicker and inserted deeply inside the model to ensure it's bounded enough.
0
Reply
thanks mate
(Edited)
The designer has replied
1
Reply
love it!!
0
Reply
Wolverine printed well with the print profiles that were already configured. The only adjustment I made was using organic supports over the "normal" supports. Organic gave a much quicker print time. (I also didn't have any brown filament handy so you'll notice the costume has black instead of brown highlights lol)
(Edited)
The designer has replied
1
Reply
thank you for sharing!!! it looks great!!!
0
Reply
Hi! Which skin tone filament did you use ? Thanks
The designer has replied
0
Reply
I use ziro pla “skin” from Amazon
1
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
overall print is good. a few things could be improfed. the legs are to thight, the arms are a bit to loose. the head fits the tight and so is the hair.
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
The designer has replied
0
Reply
thank you for the back-to-back 4.0’s without any feedback provided 🙂
0
Reply
sorry, i had some problems to remove the supports, but your model is great 👍🏻
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
0
Reply

Remixes (0)

There are no remixes yet