Hex Shelf Support Brackets

Remixed by
Copyright Claim

Hex Shelf Support Brackets

Remixed by
Boost
96
158
36
GIF

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 3 walls, 20% infill
0.2mm layer, 3 walls, 20% infill
Designer
4.3 h
1 plate
4.8(25)

MultiColor - 0.2mm layer, 3 walls, 20% infill
MultiColor - 0.2mm layer, 3 walls, 20% infill
Designer
4.5 h
2 plates
4.8(4)

Boost
96
158
36
10
251
265
Released

Description

Based off the hexagonal slide in place shelf support brackets. Check attached image for assembly, but I will also put the steps below. The first profile is both side single color, but for convenience I will attached a second profile that is 2 plates separating the hexagon inlay from the bracket so you can play with color combinations. I would love to see what you come up with!

 

I kept the support minimal, so if you find the initial start of the overhang on the big triangular bracket to need supports I can update the profile to include them, but I had success without needing them.

 

Play with the infill and scale based on your needs for size and strength. I have it just set at 20%

 

1. Screw small brackets to wall

2. Slide the big triangular brackets in place over them

3. Attach the hexagonal inlays to the shelf (making note of the distance between the brackets you mounted to the wall in the previous step

4. Slide hexagonal inlays into the big triangular brackets

Comment & Rating (36)

Please fill in your opinion
(0/5000)

Print Profile
MultiColor - 0.2mm layer, 3 walls, 20% infill
great print, love a way the two pieces fit together.
The designer has replied
1
Reply
Looks great, thanks!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Great design, made mine big and to match my dewalt tool's.
The designer has replied
0
Reply
Awesome color combo, I like it!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Simple but effective design.
The designer has replied
0
Reply
Looks great! Thanks for the rating and sharing!👍 If you like the design and care to support me, shoot the design a boost (small Rocket 🚀 or "BOOST“ button) Happy printing and feel free to check some of my other designs!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Super Sturdy
The designer has replied
0
Reply
Looks great, thanks!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
printed two sets at 225% for a 72” long shelf. came out great! very strong
The designer has replied
0
Reply
Awesome! Looks great!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Great design. printed perfect on first try.
The designer has replied
0
Reply
Looks great! Thanks!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Scaled the print to 150% to accommodate for the larger shelf. works perfectly!
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
It’s a great design that was easy to adjust to my shelf. Thanks for sharing printed in generic ABS with 0.2mm layer 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
I scaled these up 200% for a larger shelf. they printed great but I think with the scaling the small piece that mounts to the wall has some movement when the bracket is slid on. as I didn't print the profile exactly like the designer provided I still gave 5 stars. these hold the shelf very well and I would be willing to bet they can hold a lot of weight. Great Model!
0
Reply