Wambo1337

0.2mm layer, 2 walls, 10% infill Rectilinear, 12% overlap, Arachne, Outer/Inner

it sure did 👍, the multicolor filament looks rad

Benny Boots

brdoyle14

i just completed reprinting this in BL PETG Translucent Pink and Olive for a glassy flower effect.

I'll upload this print profile later today 🤗👍

Mario W.

cover

PXL_20240203_220608084_5c17a5b3-8d8c-47c5-bffa-8e8bbd3065b8.jpg

PXL_20240203_073443365_f26cb5c9-c764-4f34-89cd-4ae6ebf7a060.jpg

PXL_20240204_235506998_9c6d0eef-77a7-498a-b575-6a81d95bd23a.jpg

PXL_20240204_235604246_a3743f63-a83e-4faa-ac36-6251e0ed24a8.jpg

PXL_20240203_151130480_54a9904a-6afa-4b01-b53e-fb0e1ed76dac.webp

plate_1.webp

plate_2.webp

PXL_20240203_073443365_e725e80a-b451-4d63-b411-419af181e8cb.webp

PXL_20240203_220608084_7d3fcc12-c084-4f88-b9e4-b7dc2a6ad999.webp

plate_1.png

plate_2.png

.4 nozzle.2 layer height10% rectilinear infillArachne,Outer/Inner<ul><li>In my print I'm using Bambu Basic PLA and I painted (using filiment material color change) the top lip to add contrast</li></ul>

PXL_20240316_150714367_2768060b-0856-4118-a259-797a042c163c.webp

PXL_20240316_150417046_f0fef537-d1c9-4441-8b07-71f2dfa82aff.webp

PXL_20240316_150423078_695c8a75-56ea-4dbe-b65a-e53e073fa674.webp

Beautiful PETG Translucent Pink with Olive in my profile, but you may choose any PETG Translucent colors that you wish to use.<ul><li> WE'VE ADDED A PAUSE ON THE SMALLER DISH AT LAYER 175.  This was done so that you can manually swap the filament if you are not using an AMS.  The pause will allow us to manually change filament colors so that the top lip of the smaller bowl can have a contrasting color.  Or, you may choose to simply resume the print when it pauses and keep it a single color bowl, which also looks nice.</li></ul>These will take a long time to print, but it's worth it.PETG Translucent shouldn't deform until about 185f or 85c, so you may be able to wash these in your automatic dish washer machine.&nbsp;These are SOLID all the way through.  Solid Walls and Solid floor.  And without alternating infill directions, so that we get a better-clearer end result.  However, I have not slowed down the speeds at all in this profile, else this would take well over a day or two to print.&nbsp;This looks beautiful and if you can afford the filament and the time to print it then it's worth it.

PETG Translucent - 0.2mm layer, 6 walls, 100% infill

This is a snack bowl with a larger lower bowl/containter for tossing in your snack remains, shells, refuse, etc. &nbsp;Or you may use the larger lower container by itself to hold your popcorn or potato chips.&nbsp;I found this design from a person who goes by user named GleZz at https://www.printables.com/model/31675-snacks-serving-bowl-with-waste-compartment

Snack Bowl

Global

Print Profile(2)

Description

Comment & Rating (6)

License

Related Models

Pistachio Bowl 2.5 PARTY EDITION

Chalice of Death and Beauty by AcmeArt

Pistachio Bowl 2.5

Modern Bonsai Pot Bowl